How to Repair & Sew Leather Boots

by Kerri Miller

Leather boots are generally expensive, so it can be upsetting when they become damaged. There is always the option of taking them to a shoe repair shop; however, repair shops can be pricey. Repairing damaged boots will take a little time due to the drying processes, but it requires very little skill. It is always best to work with leather when the temperature ranges between 75 and 85 degrees Fahrenheit.

Items you will need

  • Two washcloths
  • Bucket of warm water
  • Liquid dish soap
  • Towel
  • 3 to 4 foam applicators
  • Leather conditioner
  • Scissors
  • Repair compound
  • 320 grit sandpaper
  • Rubbing alcohol
  • 600 grit sand paper
  • Leather color restorer
Step 1

Wet two washcloths in a bucket of warm water, and ring them out. Apply a little soap to the first rag, and wash the surface area of the leather boots several times. Use the second rag to rinse the surface area. Towel dry the surface area of the leather boots, and let stand until completely dry. Apply leather conditioner after boots are dry, and allow the leather conditioner to penetrate the leather for 24 hours.

Step 2

Fix any raised or torn areas in the leather either by trimming down with a scissors or applying the repair compound as an adhesive. Trim off any excess material with the scissors, and sand down the area of the leather boots with the 320 grit sandpaper to smooth out. Use rubbing alcohol to wipe down the area the same as if you were cleaning it. Allow the leather boots to dry. Apply the repair compound to any other areas needing repair and allow your leather boots to dry.

Step 3

Wipe the boots with rubbing alcohol, or use a 600 grit sandpaper to smooth the surface area if needed. Be careful using the rubbing alcohol though. If you wipe the leather boots too much, you may remove too much of the repair compound.

Step 4

Apply the leather color restorer to the surface area of your leather boots. Apply in several coats to allow for flexibility in the material. Make sure the surface area is free of dust and particles. When the boots are completely dry, sand the surface area until smooth and apply another coat of color restorer. Allow the boots to completely dry.

Step 5

Apply leather conditioner to your leather boots, and allow the boots to dry.

Warnings

  • Do not use hot water when cleaning the surface area of leather boots; use lukewarm water. Some leather cannot be repaired if the damage is to a large surface area or pieces of the material are completely missing.

Photo Credits

  • fashionable leather boots image by terex from Fotolia.com

About the Author

Kerri Miller is a very detail-oriented person who loves an opportunity to be creative. She has a lot of experience in writing of all sorts, both technical and non-technical. She has written poetry and had it published, and has more than eight years of experience in legal writing and book writing.